STOLZENBERG KSV 1000, Руководство по эксплуатации

Страница: 29 / 35

Maintenance
11/12/2017
KSV 1000 27
5.8 Adjustment of the drive
Re-adjustment is necessary due to wearing of the frictional wheel de-
pending on use.
Park the suction sweeper as described.
Take the key out of the key-operated switch.
Remove the main panelling.
1 Frok crown of the driving
linkage
6 Driving linkage
2 Back nut 7 Adjustment of the free
wheel
3 Swivel lever 8 Frictional wheel
4 Frictional wheel roller 9 Driving belt
Loosen the back nuts of the turnbuckle of the driving linkage.
To reduce the distance between the frictional roller and the frictional
wheel, you will have to turn the turnbuckle counter clockwise.
Make sure you only only turn the turnbuckle one or two threads.
Turning the the turnbuckle too far, could result in the dangerous
possibility that both rods of the driving linkage might not find suf-
ficient support and fall apart during operation!
Check the position of the swivel lever:
Insert the key into the key-operated switch.
Start up the suction sweeper.
Carefully actuate the driving lever to move forward.
WARNUNG