STOKVIS ENERGY SYSTEMS ECONOFLAME R30, Установка, эксплуатация и обслуживание

Страница: 12 / 36

8
Doc653/30CV02A
2.4 Safety aspects
The following safety devices are installed on the boiler:
- Temperature monitoring system
- High limit temperature monitoring system (STW)
- Limit temperature monitoring system (STB)
(both are adjustable)
- Frost protection system
- Using an external sensor, if the external temperature falls below 0°C
- Based on the fl ow temperature, if this is below 5°C and/or the domestic hot water tempera-
ture is below 10°C
- Flame monitoring by means of ionisation measurement
- Fan
speed monitoring
- Flue gas temperature monitoring
- Flow monitoring using a combination of fl ow water temperature and fl ue gas sensor readings
If one of these safety systems is activated, the boiler will go to an interlocking or lockout fault and
will be switched off. Lockout faults can only be reset by pressing the reset button, after rectifying
the fault.
3 Safety
Installation specifi cations
Read the specifi cations before commencing with installation.
The equipment should be installed by a recognised installer in accordance with applicable na-
tional and local standards and specifi cations.
The installation should only be used for heating systems with a maximum water temperature of
90°C.
It is expressly stated that these installation specifi cations should be regarded as a supplement to
the above mentioned standards and specifi cations, which shall take priority over the information
contained in this technical documentation.
Icons used
y
Instructions that are of essential importance for the correct functioning of the installation.
w
If the actions, operating procedures, etc. are not followed accurately, this may cause serious dam-
age to the installation, personal injury or damage to the environment.
v
Danger of electrical shocks.
x
Useful information.
Maintenance
Work on the electrical installation should only be carried out by a recognised installer in accord-
ance with the applicable electrical regulations.
Work on the gas equipment and hydraulic installation should only be done by personnel having
the required training, in accordance with the applicable safety rules and regulations for gas instal-
lations.
w
Keep all unauthorised persons away from the installations.