Stobag SKIMY SRCU 01M, Инструкции по установке и использованию, предупреждения

Страница: 67 / 92

EN
67
5”
9
• Automations connected to a
Brightness Sensor (sun)
During the Group creation procedure, if
a selection is made from the “Automa-
tion List” of an automation associated
with a radio code type , after confirming
the selection by pressing
OK (the number
stops flashing) the , symbol appears next
to the automation Number.
The setting can now be selected for the
brightness sensor as follows:
- , by pressing OK once;
- , by pressing OK twice;
-
(no command), by pressing
OK
three times.
• Modifying or Deactivating a Group
To modify a previously created Group,
recall the Group NUMBER and proceed
in the same way as for creation (
Fig.
➒
),
modifying the setting of each Group auto-
mation as required.
If all automations in the Group are disa-
bled, the Group number will start flashing
again, indicating that it is no longer active.
SKIMY_SRCU_80M.indd 67 SKIMY_SRCU_80M.indd 67 1.3.2010 10:52:26 Uhr 1.3.2010 10:52:26 Uhr