Running the demonstration
UM1011
26/49
Doc ID 18064 Rev 1
Figure 24.
Time Show submenu
To exit the
Time Show
submenu, press the SEL push-button. To exit the
Time
submenu,
select Return and press the SEL push-button.
Date submenu
This submenu is divided into two items that allow the user to display or set the current date.
●
Date Adjust:
select this item after each power-up in order to set the current date. If the
time and date have not been previously configured, a message is displayed, prompting
the user to set the time and date or to exit to the upper submenu. The date is displayed
as: Year, Month, Week Nbr, Day Nbr (number of the day in the year) with the selected
day shown in the month. There is no default date since you have to set the date at least
once.
To adjust the date:
1.
Start by selecting the year. To select the year, use the UP or DOWN push-button.
Pressing the UP push-button displays the current value plus one; pressing the DOWN
push-button displays the previous value. To confirm the selected year and continue to
the month configuration, press the SEL push-button.
Figure 25.
Setting the year
2.
Follow the same procedure to select the month and press the SEL push-button to
confirm.
