Running the demonstration
UM1011
22/49
Doc ID 18064 Rev 1
Figure 16.
Card removal
2.7 Demonstration
applications
The following section provides a detailed description of each part of the demonstration.
In the demonstration, the core runs at HCLK = 24 MHz. Four LEDs: LD1, LD2, LD3 and LD4
flash throughout the demonstration at a frequency depending on the core clock.
2.7.1 Product
presentation
This part of the demonstration presents all the STM32F100ZET6 embedded peripherals
and features. The product presentation is made with a slide show. Each slide is associated
with a dedicated speech. When you start the product presentation, the first slide appears
and the corresponding speech starts. Once the speech is finished, the second slide is
displayed accompanied by its speech and so on until the last slide.
When the
Product presentation
menu is selected, the message shown in
Figure 17
is
displayed on the LCD screen.
Figure 17.
Product presentation is ready to start
Err: SDCard Removed
Please check SD Card
Press JoyStick UP to
Restart the demo...
Press SEL to start
When presentation
starts use RIGHT and
LEFT to go to the
next/previous slide
and SEL to exit
