1.
Configure the gateway to send data to the closest router address. The list of routers is available from The
Things Network website at www.thethingsnetwork.org/docs/gateways/packet-forwarder/semtech-udp.html.
A gateway configuration example is:
eu1.cloud.thethings.network
.
Use the following AT command to configure the gateway packet forwarder to connect to The Things Network
on UDP port 1700:
AT+PKTFWD=eu1.cloud.thethings.network,1700,1700
2.
In [
The Things Network Console Console
], click on [
Gateways
]>[
Add Gateway
].
3.
Provide the necessary gateway information:
–
Gateway EUI: (taken from the gateway ID information. Refer to
)
–
[
Description
]
–
[
Frequency plan
]:
Europe 863-870 MHz (SF9 for RX2 -recommended)
–
[
Gateway Server address
]:
eu1.cloud.thethings.network
4.
Click on [
Create gateway
]
Figure 33.
The Things Network registered gateway overview
UM2587
The Things Network (TTN) v3 server setup
UM2587
-
Rev 3
page 39/55
