19
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-SGC60 PRODUCT CODE: 700793 04/2020
Installation (Cont.)
Installing the gas regulator
• Connect the elbow fitting to the appliance gas manifold connection.
Check and ensure that the seals between the elbow and manifold
connection are in place and in good condition.
• NG:
If connecting the appliance to a Natural Gas (NG) outlet, connect the
supplied gas regulator valve to the elbow, as illustrated in Fig. 10-A.
• ULPG:
If connecting the appliance to a ULPG outlet, connect the
supplied brass test point adaptor to the elbow, as illustrated in Fig. 10-B.
• When making the connection, ensure that the gas regulator valve outlet
thread matches the thread of the gas connector. Use an approved gas
thread tape or compound around the threads.
• Ensure that the gas regulator valve installation location is perpendicular.
• Ensure that the supply connection point, test point and NG regulator
adjustment screw (for NG installation) are accessible for testing and/or
adjustment with the hotplate in the installed position.
• After installation, open the gas source switch and check the valve body
connections with soap and water for leaks.
WARNING:
• The regulator valve outlet pressure is set at the factory, please do not
adjust it in order to avoid the occurrence of safety accidents.
• If you find any abnormality of the regulator valve, stop using the appliance
and contact our after sales support centre for advice.
Do not attempt any
maintenance yourself
.
Fig. 10-A
NG connection
Fig. 10-B
ULPG connection
Pressure
test point
Pressure
test point
