16
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-SGC60 PRODUCT CODE: 700793 04/2020
Fig. 6
Sealing tape
Screw (A)
Mounting
bracket (B)
Installation (Cont.)
Installation options
When fitting a gas cooktop above a drawer or standard housing unit, suitable
precautions must be taken to prevent contact with the cooktop hob and base,
which become very hot during operation. The recommended method for over-
coming this problem is to fix a wooden panel within the cabinet at a minimum
distance of 25mm below the underside of the cooktop (see Fig. 3, page 14).
NOTE:
The panel below the hob must be easily removable to enable servicing if
and when required.
Affixing the cooktop
Once the sealing tape has been installed around the underside of the
cooktop, carefully turn it back over and gently lower it into the aperture hole
that has been cut out. Push it down gently so that the cooktop is resting
firmly on the cabinet/benchtop surface.
Now secure the cooktop in position using the mounting brackets supplied.
• Place a mounting bracket over the hole that matches the size of the
screws
—
there are appropriate screw holes in each corner of the hob.
• Insert a screw (A) through
the mounting bracket (B)
and slightly tighten it so
that the bracket is attached
to the cooktop, but you
can still adjust its position
(Fig. 6).
• On the underside of
the cooktop, adjust the
mounting brackets into a
position that is suitable for
your benchtop. Then fully
tighten the screws (A) to
secure the cooktop into
position.
