2
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: PA19W PRODUCT CODE: 703227 11/2020
Important safety precautions concerning refrigerant R290
WARNING: Combustible & Dangerous
This symbol alerts you to take care as the appliance contains
a flammable refrigerant: R290 (propane). Take extra care when
installing the unit and when carrying out maintenance. R290 is
a colourless and odourless hydrocarbon gas. It is an efficient
refrigerant with a low Global Warming Potential (GWP) and no
potential for ozone depletion.
While R290 is highly flammable, there will be no risk of burning and explosion if the
appliance is properly installed and maintained following all instructions and safety
advice in the supplied manuals.
R290-Specific Safety Advice
WARNING!
• The room in which this air conditioner is installed must have a minimum area of more
than 4m
2
. (This unit is designed for use in a room of approximately 10–14m
2
size.)
• The appliance shall be stored in a well-ventilated area without continuously
operating sources, such as open flames, an operating ignition gas appliance or an
operating electric heater. Do not expose the appliance to high heat, sparks and open
flames.
• Do not pierce or burn the appliance.
• Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
• Be aware that refrigerants may not contain an odour.
• The ratings of the fuse installed in the built-in control unit are T, 2AL, 250V~.
• This air conditioner has been fully charged with refrigerant at the factory. Should a
recharge become necessary, it may only be recharged by a professional installer.
• Maintenance must only be carried out by properly qualified, authorised personnel. If
the appliance requires maintenance or service, contact our after sales support centre.
• The service technician must strictly comply with:
– all safety instructions in the manual provided with the appliance
– all relevant provisions of gas-related local laws and regulations.
• After servicing the appliance, the service technician must:
– check that air cannot enter the refrigerant system
– check for refrigerant leaks when moving the air conditioner
– carry out a test cycle under controlled conditions after installing the unit and record
the operating data.
