AFTER SALES SUPPORT
1300 777 137
09
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Getting Started
Before First Use
Prior to using your Carpet Cleaner, please read all the safety and operating instructions thoroughly.
Please ensure you follow the steps below before using this appliance. We recommend you keep the
original packaging for storing your Carpet Cleaner when not in use.
1. Unpack the product but keep all packaging material until you have made sure your new Carpet
Cleaner is undamaged and in good working order. Plastic wrapping can be a suffocation hazard
for babies and young children, so ensure all packaging materials are out of their reach.
2. Remove the twist-tie which is securing the electrical cord. Uncoil the cord and straighten it to
remove any kinks. Do not use this product if these parts are damaged. In case of damage, phone
the After Sales Support line.
Assembly
The Carpet Cleaner comes in two pieces (top part with handle and trigger, and bottom part being the
rest of the body) which makes assembling quick and easy.
NOTE: Do not plug the cord into a power outlet until the Carpet Cleaner is fully assembled.
CAUTION: Do not over tighten the screws as this will thread the holes. Do not operate the
Carpet Cleaner without the handle securely screwed into place.
1. Place the body of the Carpet Cleaner in
an upright position.
2. Align the handle to the grooves on the
body of the Carpet Cleaner.
3. Once handle is in place, secure to the
body of the Carpet Cleaner with the 2
screws supplied. See Fig. 1.
Fig. 1
