AFTER SALES SUPPORT
1300 777 137
14
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Other Useful Information
Cleaning and Maintenance
1. Switch off and unplug the Carpet Cleaner at the power outlet.
2. Remove the clean water tank and discard any water remaining within the tank. Rinse with warm
water (40ºC max) to clean.
3. Remove the waste water tank and discard any waste water within the tank. Rinse with warm
water (40ºC max) to clean.
4. If necessary, remove any hair or large pieces of debris from the Scrubbing Brush.
5. Clean the exterior of the Carpet Cleaner using a soft damp cloth and dry thoroughly.
Cleaning the Filters
1. The exhaust filter is found in the waste
water tank. Remove the exhaust filter by
pressing down the latch then pulling the
waste water tank handle fully forward to
expose the exhaust filter latch. Pull the
exhaust filter latch forward to release, then
pull out the exhaust filter forward and left to
remove. See Fig. 7.
2. Remove the filter sponge from the filter and
rinse with water to remove all the dust, dirt
and particles. Allow to dry thoroughly before
replacing back into the waste water tank.
See Fig. 8 and 9.
3. The filter inlet sponge is found in the bottom
on the Carpet Cleaner, under the waste
water tank. To access it, first remove the
waste water tank. Pull out the filter inlet
sponge, then rinse, then rinse with warm
water to clean off any dirt that has become
attached. Allow it to dry thoroughly before
replacing back into position in the Carpet
Cleaner. See Fig. 10.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
NOTE: If for some reason you need a new filter sponge or filter inlet
sponge, do not return this product to place of purchase. Instead,
please call the After Sales Support line for a replacement filter.
NOTE: Do not leave water in either of the water tanks. Mineral deposits and mildew can form
which will affect the performance of the Carpet Cleaner.
