AFTER SALES SUPPORT
1300 777 137
11
MODEL: IA0850 PRODUCT CODE: 51703 12/2015
Instructions
Preparing the Carpet Cleaner for Use
NOTE: Only use low foam carpet cleaning solutions as using the incorrect solution may cause
excess foaming. Excess foam will prevent the machine from working effectively. It is also
recommended to purchase anti-foam solution to add to the waste water tank to prevent excess
foaming. Please follow the recommended usage quantity listed on the bottle. These are both
available from all good hardware and DIY outlets as well as professional carpet cleaning stores.
4. Return the clean water tank back into the original position within the Carpet Cleaner. To lock
and secure, push the clean water tank back and press down on the handle until both the
handle and the water tank clicks into place.
CAUTION: Do not use the Carpet Cleaner if the clean water tank is not securely in position.
NOTE: The Carpet Cleaner can also be used without carpet cleaning solution. Water alone can
also clean your carpets.
CAUTION:
Do not use any solvents, cleaners with strong acidic or strong alkali formulas or any
type of cleaning solution not specifically for use in carpet extraction cleaning machines.
CAUTION:
Keep Carpet Cleaning Solution out of reach of children. In case of contact with
eyes, rinse immediately with plenty of water and seek medical advice. As with all detergents,
people with sensitive or damaged skin should avoid prolonged contact with the product.
Fig. 2
Fig. 3
1. Remove the clean water tank from the
Carpet Cleaner and fill with water. To remove,
lift the clean water tank release handle up
and pull away from the Carpet Cleaner. See
Fig. 2 and 3.
2. Unscrew the clean water tank cap and add
1 capful of your desired carpet cleaning
solution (not included). Only use 1 capful of
cleaning solution per tank.
3. Fill the rest of the clean water tank with warm
water (max 40ºC) and replace the clean
water tank cap.
