Stinger HEIGH10 STH10CIV, Руководство по установке

Страница: 18 / 24

18
Vehicle Installation
A - GPS Antenna
B - 16-Pin Power/Speaker Harness
C - USB Cables
D - LVDS Display Cable (USB)
E - 8 Pin Display Power Cable
F - Radio Antenna
SPEED
SPEED
A
B
C
D E
F
From the HEIGH10 Box:
 LVDS Display Cable (Blue USB Type)
 8 Pin Display Power Cable

Rubber Accordion Boot
Parts Needed:
1. Inside the vehicle with the
completed radio/panel assembly,
plug the following into the back of
the HEIGH10 module:
If you have connected Speed Sense or
installed the External Microphone, plug
those in at this time.
2. With all the HEIGH10 connectors
plugged in, re-connect the factory
climate control, hazard switch,
and passenger side airbag light
harnesses.
3. Route both Display Cables (D & E)
over the top of the assembly and out
the front so they can be connected
to the display.
Complete radio/panel assembly not
shown for illustration purposes