Stinger HEIGH10 STH10CIV, Руководство по установке

Страница: 7 / 24

7
1. Remove the four Phillips screws
around the climate control panel.
From the front of the radio panel,
press on the center knobs to push the
assembly out the back of the panel.
The fan speed and temp control outer
knobs will pop off when this is done.
2. Remove the two Phillips screws on
the passenger side air bag light.
3. Remove the three Phillips screws
holding the air vent (only one visible
in image).
4. Remove the two Phillips screws on
the hazard switch.
5. Remove all the plastic and metal
clips from the factory panel and install
in same locations on the HONK838
panel.
6. Using the factory screws, install the
removed components into the same
locations on the HONK838 panel.
Vehicle Disassembly
1
3
1
2
4