Stinger HEIGH10 STH10CIV, Руководство по установке

Страница: 15 / 24

15
Compression Spring
Radio & Display Assembly
Start by attaching the
Metal Bracket
to the
Plastic Mounting Bracket
using
two M4 X 6 screws (1). Slide the
Radio Module
in between and align the
two holes with the metal bracket. Attach using two M4 X 6 screws (2).
M4 X 6
M4 X 6
Metal Bracket
Plastic
Mounting
Bracket
Radio
Module
Using the middle set of holes on the back of
the display, attach the
Clamp Assembly
to the
display using four M4 X 14 screws. The clamp
assembly should be approximately 2.5” from
the top edge of the display, and approximately
1.825” from the bottom edge of the display.
Clamp Assembly
TOP
M4 X 12 (4X)
Ensure the TOP indicator on the
Clamp Assembly is facing UP.
M5 x 10 (2X)
Lower Hole Both Sides
Attaching The Display Mounting Clamp
1
2