English
Page | 13
Interference during programming
- If interference is suspected during
programming of the WAA, the clinician should confirm that the Bluetooth®
data transmission is operating properly. Bluetooth® data communication is
confirmed by the solid blue light on (when device is paired) and a fast blinking
yellow light (only when data is transmitted). If during the programming session
the light indicator is not blinking then the clinician should do the following:
•
Terminate the current programming session and shut down the
WaveCrest Application.
•
Check for sources of Bluetooth® interference in the surrounding area.
•
Remove or turn off the source of interference.
•
Re-establish the Bluetooth® link with the WAA through pairing.
•
Resume programming by opening the WaveCrest Application.
•
Confirm the light indicator is now blinking.
