English
Page | 16
O
VERVIEW OF THE
U
SER
C
ONTROLS
BUTTONS
Key
Action Description
Increase Amplitude Button
–
Used to increase the stimulation strength.
Holding the button down for more than 2 seconds ramps the amplitude
to the highest level, 24.
Power ON/OFF Button
–
Used to turn the WAA ON or OFF. Green LED is
a default indicator and will blink to indicate power status. A solid Yellow
light indicates that the antenna is disconnected and is not functioning.
Decrease Amplitude Button
–
Used to decrease the stimulation
strength. Holding the button down for more than 2 seconds ramps the
amplitude to the lowest level, 1.
Change Program Selection
–
Depressing the Increase Amplitude Button
(‘+’)
and the
Decrease Amplitude Button
(‘
-
‘)
at the same time will alternate the programmed setting
to either
‘1’ to ‘2’ to ‘3’ and back to “1’
.
LEDS
Action Description
Pattern and Color
Description of Pattern
Charging
Solid Blue
OFF, Not Charging
None
Charge Complete
Battery FULL
Blinking Blue
Low Battery
Blinking Yellow
ON
Setting 1
Blinking Green (single)
ON
Setting 2
Blinking Green (double)
ON
Setting 3
Blinking Green (triple)
Minimum
Index
Blinks Once Yellow
Maximum
Index
Blinks Once Yellow
