English
Page | 19
Situation
Action
Stimulation is too strong
Decrease amplitude with the
Decrease Stimulation Key
Stimulation is not strong enough
Increase amplitude with the Increase
Stimulation Key
You have unexpected changes in
stimulation
1.
Remove the WAA
2.
Decrease amplitude
3.
Put the WAA on your body
4.
Adjust amplitude to desired level
You have tried adjusting stimulation
but are unable to find an effective
setting
Contact your clinician
M
AINTENANCE
B
ATTERY
C
HARGING
Notes:
▪
Use only the USB Charger and cable provided to perform charging.
▪
The battery is built into the WAA and does not need to be removed.
Contact your clinician if you experience poor battery life.
▪
You will need the USB Charger Kit to recharge the internal battery.
▪
The antenna does not need to be connected during charging.
Steps:
1.
Remove the WAA from your body.
2.
Connect the USB cable to the power adapter.
3.
Plug the power adapter into a wall outlet.
4.
Connect opposite end of USB cable to the micro-USB port on the WAA.
5.
Charging Indicator Light will stay solid on while the battery is charging.
6.
Allow the battery to charge for at least four hours.
7.
Charging Indicator Light will blink when the battery is fully charged.
8.
WAA is now ready to be used again.