STILLE imagiQ2 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 28

STILLE imagiQ2 Скачать руководство пользователя страница 22

22

Stille imagiQ2

TM

user manual

Care

n

C

are

Charging

The imagiQ™ table has an integrated, fully automatic
charging unit. Regular charging gives high operational
reliability and a long life for the batteries.

The mains voltage is 100 - 230 V AC. An indicator in

the fuse-holder integrated

in the mains inlet shows the preset voltage setting.

The secondary voltage is 24 V DC.

The ImagiQ2™ table is approved for charging in the

operating theatre with a patient on the table.

The batteries are NOT being charged when the

Quick-Stop is off, (Note: the blue LED on the hand
control will not light up if the Quick-Stop is off).

If the batteries are not charged correctly they might

become damaged.

See page 17 for additional battery information

CARE and MAINTENANCE

1.

Constant blue light indicates the charging is in progress.

The table is connected to mains.

2.

Constant blue and green light indicates

the batteries are

fully charged. Maintenance charging in progress

1.

2.

Charging instructions

1. Park the table.
2. Connect mains cord and check that the blue LED on
the hand control lights up.
3. Charging is complete when both blue and green LED’s
are lit constantly.

Note 1: The mainswitch must be turned ON

Note 2: A damaged mains cord must be replaced imme-

diately. Always use imagiQ2™ table original mains
cord.

Note 3: Unplug the mains cord before unparking the table.

«
...
20
21
22
23
24
...
»

Содержание imagiQ2





























Отзывы:

Нет отзывов