STILLE imagiQ2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 28

STILLE imagiQ2 Скачать руководство пользователя страница 16

16

Stille imagiQ2

TM

user manual

Handling

n

Saf
et

y Inf

or

mation

Position adjustment

Note:

All table top movements cease immediately if the button in question is released.

7. Column down

8. Column up

9-10. ISO ROLL

™ / Lateral tilt

ISO ROLL™ / Lateral tilt of the table top is achieved by pressing and holding one of the hand control buttons for
lateral tilt until you reach the desired position.

Movement stops automatically when the table is in zero position. You can move past the zero position by relea-
sing the hand control button and then pressing it again.

Note:

If the table is unparked it will be automatically parked before lateral tilt is started.

11-12. Trendelenburg / Anti Trendelenburg (Longitudinal tilt)

The head-end is moved upwards or downwards.
The table top is tilted longitudinally by pressing and holding one of the hand control buttons for Antitrendelenburg
until you reach the desired position. Movement stops automatically when the table top is in zero position (Hori-
zontal). You can move past the zero position by releasing the hand control button and then pressing it again.

13. Quick-Trendelenburg (Quick lowering of head-end)

Press button for extra quick lowering of head-end.

Note:

When the Quick-Trend function is used the table does not stop in the zero position.

Note:

If the longitudinal tilt function is activated during parking/ un-parking, the parking/ un-parking sequence
is temporarily interrupted.

14. Return to zero (Horizontal)

The table top returns to the zero position when you press and hold the return to zero button.
Keep button pressed until the table top has stopped in horizontal position.

Note: Column up/ down or lateral/ longitudinal float is not adjusted by the return to zero function.

«
...
14
15
16
17
18
...
»

Содержание imagiQ2





























Отзывы:

Нет отзывов