STILLE imagiQ2, Руководство пользователя, Страница: 11 / 28

11
Stille imagiQ2 TM user manual Overview
n
Ov
er
view
Table function priority
All movements of the table-top cease immediately if the operating button or pedal has been
released. All operations including those of the floor lock cylinders can be interrupted by either
pressing the main ”OFF” button or by disconnecting the voltage with the emergency power
switch.
If several commands are given simultaneously from the same control unit, all movements
cease. (With the exception of fast lowering of the head end (“Quick-Trend”) in combination
with head end down). It is only possible to connect one hand control to the table. Pressing the
”OFF” button however, always takes precedence over all other commands. All hydraulically
assisted movements can be activated by the hand control but only one hydraulically assisted
movement can be activated at one time. Certain table-top movements can be activated by
foot control. Column end up/down and fast lowering of the head end is executed indepen-
dently of if the table is parked or not, and have priority over parking/unparking commands.
Should a parking/ unparking sequence be in progress when one of these controls is activated,
the parking/ unparking sequence is temporarily interrupted. Column up/down movements are
executed independently of the parking status but a parking/ unparking sequence in progress
takes precedence. The lateral tilt command or a return to zero position command is only pos-
sible when the table is parked and an acknowledgement has been received from the position
switches for the parking circuit. An attempt to activate these movements when the table is
unparked will result in an automatic parking of the table. The table can only be unparked when
the table is in safe position, or if the weight of the load on the table is less than the unregula-
ted transport weight (100kg). If the table is loaded with a higher weight load than allowed a
fixed sound signal gives indication that the table is overloaded, the sound signal can be reset
by lowering the weight load.
Safe position
The table is in safe position when parked. for safe position when unparked with load the table
needs to be adjusted, the safe position is, table top centered side to side and centered bet-
ween the blue arrows on the side, it might be needed to lower the column to achieve safe
position.
WARNING: Do not activate lateral tilting or return to zero position during transport of the
table. Make a habit of switching off the table before any transport is begun.
The return to zero sequence is activated by pressing the zero button and holding it depres-
sed until any lateral or longitudinal tilting movement has ceased. If the zero button is released,
all movements cease immediately. The return to zero sequence restarts from the beginning
when the button is pressed again. Lateral and longitudinal tilt movements are provided with
automatic stop functions at the zero position. Movement ceases when the table has reached
these positions. The movement is reactivated by releasing and depressing the button/pedal.
This simplifies individual resetting of lateral and longitudinal tilting. There is no automatic
stop at zero position function with fast lowering of the head end. The optional guide wheel is
activated simultaneously when the table is unparked. The guide wheel is retracted hydraulically
and is lowered by a return spring. When parking, the guide wheel is retracted automatically to
avoid obstructing other equipment.