Still RX60-60, Оригинальное руководство пользователя

Страница: 311 / 408

CAUTION
Excessive water pressure or water and steam that
are too hot can damage truck components.
–
Strictly adhere to the following steps.
CAUTION
Abrasive cleaning materials can damage the surfa-
ces of components!
Using abrasive cleaning materials that are unsuitable
for plastics can cause plastic parts to dissolve or be-
come brittle. The screen on the display-operating unit
could become cloudy.
–
Strictly adhere to the following steps.
–
Park the truck securely.
–
Switch off the key switch.
–
Disconnect the battery male connector.
–
Do not spray electric motors and other elec-
trical components or their covers directly
with water.
–
Use only high-pressure cleaners with a
maximum output power of up to 50 bar and
85°C.
–
If a high-pressure cleaner is used, maintain
a distance of at least 20 cm between the
nozzle and the object being cleaned.
–
Do not aim the cleaning jet directly at adhe-
sive labels or decal information.
–
Remove all deposits and accumulations of
foreign materials in the vicinity of hot com-
ponents.
–
Use only non-flammable fluids for cleaning.
–
Observe the manufacturer's guidelines for
working with cleaning materials.
–
Clean plastics only with cleaning materials
intended for plastics.
–
Clean the truck exterior using water-soluble
cleaning materials and water. Cleaning with
a water jet, a sponge or a cloth is recom-
mended.
–
Clean all accessible areas.
Operating
4
Cleaning
299 56358042501 EN - - 11