Still RX60 35-50, Оригинальное руководство пользователя

Страница: 55 / 596

DANGER
Risk of fatal injury from falling load!
There is a risk to the driver's life if the truck is
not equipped with an overhead guard, as the driver
may be struck by a load falling from a lift height of
1800 mm or greater.
Operation of the truck without an overhead guard is
prohibited at a lift height greater than 1800 mm.
–
At lift heights of 1800 mm and above, only use the
truck in conjunction with an overhead guard.
The operating company is only permitted to
make modifications to the truck independently
if the manufacturer goes into liquidation and
the company is not taken over by another le-
gal person.
The operating company must also fulfil the fol-
lowing prerequisites:
●
Design documents, test documents and
assembly instructions associated with the
modification must be permanently archived
and remain accessible at all times.
●
The capacity rating plate, the decal informa-
tion, the hazard warnings and the operating
instructions must be checked to ensure that
they are consistent with the modifications
and must be amended if required.
●
Modifications must be designed, checked
and implemented by a design office that
specialises in industrial trucks. The design
office must comply with the standards and
directives valid at the time that modifica-
tions are made.
Decal information with the following data must
be permanently affixed to the truck so that it is
clearly visible:
●
Type of modification
●
Date of modification
●
Name and address of the company that car-
ried out the modification
Safety
2
Basic principles for safe operation
39 56388011501 EN - 05/2022 - 08