Still RX60 35-50, Оригинальное руководство пользователя

Страница: 333 / 596

NOTE
If several hydraulic functions are used at the
same time, these functions can influence each
other. For example, if the fork carriage is
raised and an attachment is operated at the
same time, this may change the lifting speed
or the operating speed of the attachment.
NOTE
Further variants and functions are available in
addition to the functions described below. The
directions of movement can be seen in the
pictograms on the operating devices. All the
attachments described fall into the category
of equipment variants. An exact description of
the respective movements or actions of the
attachment fitted can be found in the relevant
operating instructions.
With fleet manager access authorisation (var-
iant), the fleet manager can adjust the speed
of the auxiliary hydraulics for attachments.
–
See also the section entitled "Adjusting the
hydraulic speed for attachments" in this
chapter.
Attachment example for the
connection of the auxiliary hy-
draulics
NOTE
The authorised service centre will tell you
which attachments can be used with this truck.
The connection of attachments to the auxiliary
hydraulics is performed as per the diagram, as
highlighted in the operating instructions for the
attachment.
–
Observe the "Information on the auxiliary
hydraulics" in the "Technical data" chapter.
In the menu for the available hydraulic axles
for attachments, the designation
Hydraul-
ic axle
specifies the connection of the cor-
responding auxiliary hydraulics. See also the
section entitled "Adjusting the hydraulic speed
for attachments" in this chapter.
Operating
4
Attachments
317 56388011501 EN - 05/2022 - 08