Still RX60 35-50, Оригинальное руководство пользователя

Страница: 380 / 596

CAUTION
When transporting tall loads, the front view camera
cannot detect people or obstacles directly in front of
the truck.
Do not drive for long distances. If necessary, use a
guide.
Camera on the right-hand fork arm
●
Camera may only be used to place loads
into stock and remove loads from stock, not
for driving.
●
Position the lift mast vertically for optimal
horizontal visibility.
●
Select the fork arm distance so that there is
enough space for the camera when enter-
ing the load carrier. This is to avoid damag-
ing the camera or changing the position of
the load.
●
The maximum load capacity of the fork
arms corresponds to the load capacity indi-
cated on the load capacity diagram for the
truck.
●
Before daily operation, check that the cam-
era lens is uncovered, clean and undam-
aged.
CAUTION
Possible risk of injury or component damage!
If one fork arm is damaged or worn, always replace
both fork arms. If there is damage or wear on one
fork arm, it can be assumed that the counterpart also
has or will have corresponding damage or wear.
CAUTION
Risk of damage to components!
Do not expose the fork arms to lateral forces.
–
Do not drive into a pallet or load at an angle.
–
Do not press the forks sideways against a pallet
or load.
CAUTION
Possible risk of injury or component damage due to
improper modifications of the fork arms!
Modifications such as drill holes for attachments,
welding work or similar can weaken the structure of
the fork arms and cause serious accidents due to
falling loads.
–
Do not make any modifications to the fork arms.
Operating
4
Optical assistance systems
364 56388011501 EN - 05/2022 - 08