Still RX60 35-50, Оригинальное руководство пользователя

Страница: 289 / 596

positioning reduces wear on various compo-
nents, thereby reducing repair costs.
The "automatic mast vertical positioning" as-
sistance system consists of the following indi-
vidual functions:
●
Display of the "Automatic mast vertical posi-
tioning" feature
●
Automatic startup of the "Automatic mast
vertical position" feature
The truck can also be equipped with only the
"mast tilt angle display" feature.
NOTE
Check the function of automatic mast vertical
positioning whenever the truck is used.
–
See the section entitled "Function checking
of the automatic mast vertical positioning
function".
–
Press the softkey.
The symbol appears in the display.
–
Tilt back the lift mast until it reaches the end
stop.
–
Tilt the lift mast forwards.
The lift mast stops in the vertical position.
NOTE
The lift mast also stops in the vertical position
if it is tilted forwards by ≥ 3° from a backward
tilt.
NOTE
The automatic mast vertical positioning must
be calibrated in order to ensure accuracy at all
times. The "access authorisation for the fleet
manager" is required for the calibration. This
access is required:
●
When placing loads into stock and remov-
ing loads from stock on HGV ramps
●
In the event of tyre wear
●
If the lift mast is obviously not in the vertical
position
–
See the section entitled "Calibrating the au-
tomatic mast vertical positioning".
Operating
4
Tilt angle-dependent assistance systems
273 56388011501 EN - 05/2022 - 08