Still OPX 20 Скачать руководство пользователя страница 91

Страница: 91 / 140

Behaviour of the truck in response to obstacles in the roadway

DRIVE

STOP

DANGER

Danger due to collisions with obstacles that the

safety laser scanner cannot detect.
Observe the notes about the limits to detecting ob-

stacles given in the chapter entitled "Function of the

safety laser scanner".

–

Make sure that the roadway is checked for obsta-

cles that the safety laser scanner cannot detect.

Remove these obstacles.

–

If there is a risk of danger, immediately bring the

truck to a standstill by pressing one of the emer-

gency off switches.

If the truck detects an obstacle on the side of

the roadway to which the truck is aligned, the

truck automatically avoids the obstacle and

continues on its path (A).
If an obstacle is too large to drive around, the

truck stops in front of the obstacle (B).

As-

sistance

mode is resumed without inter-

vention from the operator as soon as the ob-

stacle is removed.

Operating the iGo neo

Operating the truck in "Assistance" mode

50108046112 EN - 07/2020 (03)

Содержание OPX 20













































































































































Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды

Still OPX 20, Дополнение к стандартной инструкции по эксплуатации

Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды