Still OPX 20 Скачать руководство пользователя страница 72

Страница: 72 / 140

Load individual pallets onto trucks with

long forks from the side

WARNING

Risk of injury in the unladen area of the fork
In the unladen area of the fork, the operator is able to

get closer to the fork:
In the area behind the pallet (1) there is a risk of feet

being crushed when the forks are lowered.
In the area in front of the pallet (2) there is a risk of

collision with the pallet when the truck drives off.

–

Always load pallets from the side.

–

Do not enter the unladen area of the fork.

Trucks with long forks can transport one or

two pallets.
If only one pallet is transported, the operator

must always load and unload the pallet from

the side. This ensures that the operator does

not enter the unladen area of the fork, which

could result in injury.

Observe the risk of accident due to ex-

cessive speed

DANGER

Risk of collision due to excessive speed when op-

erating in

Assistance

mode

When operating in

ASSISTANCE

mode, the opera-

tor controls the driving speed of the truck via move-

ment tracking or by using the remote control. If the

speed is not adapted to the current operating situa-

tion, accidents can occur.

–

When operating in

Assistance

mode, only al-

low the truck to drive at such a speed that it poses

no risk to persons or objects.

Do not enter the unladen area of the fork in

front of or behind the pallet.



Operating the iGo neo

Safety regulations in "Assistance" mode

50108046112 EN - 07/2020 (03)

Содержание OPX 20













































































































































Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды

Still OPX 20, Дополнение к стандартной инструкции по эксплуатации

Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды