Still OPX 20 Скачать руководство пользователя страница 16

Страница: 16 / 140

CAUTION

Danger from the optical safety systems fogging up

when moving between warm areas and cold areas
During use, ensure that the optics covers (inspection

windows) on the movement tracking sensors, on the

foot protection sensors and on the safety laser scan-

ner do not fog up.
If the optics cover of the safety laser scanner fogs

up, the truck may respond by initiating an emergency

stop.

–

Clean any fogged-up optics covers before starting

operation in

Assistance

mode (see the chap-

ter entitled "Cleaning").

Requirements for load carriers and

loads

Load carriers (pallets, crates, trolleys) that are

wider than the truck (max. 80 cm) must not be

transported in

Assistance

mode.

NOTE

As an option, trucks can be equipped or retro-

fitted for load carriers with a width of up to

100 cm.

The weight and type of load must conform to

the specifications in the original operating in-

structions for the series-production truck.
Load carriers and loads must not protrude be-

yond the lateral dimensions of the truck con-

tour. The load must not protrude beyond the

load carrier in a longitudinal or lateral direc-

tion.
The stability of the truck must not be jeopar-

dised by the weight and height of the load, in-

cluding when cornering.
The load must be secured so that it cannot fall

from the truck or slip and protrude beyond the

lateral truck contour, including when corner-

ing. The load must be stacked carefully, with

the centre of gravity as low as possible.
Load carriers and loads that do not meet

these specifications may be moved in

As-

sistance

mode only if the truck safety devi-

ces are adjusted in advance by the

Foreword

Using the iGo neo

50108046112 EN - 07/2020 (03)

Содержание OPX 20













































































































































Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды

Still OPX 20, Дополнение к стандартной инструкции по эксплуатации

Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды