Still OPX 20 Скачать руководство пользователя страница 114

Страница: 114 / 140

Maintaining the iGo neo

This section contains all of the information re-

quired for maintaining the iGo neo. Mainte-

nance must be performed in accordance with

the points in the maintenance checklist. This is

the only way guarantee that the truck remains

ready for operation; it is also a pre-condition

for any warranty claims.

Maintenance schedule

Maintenance tasks on the components for the

Assistance

mode of the iGo neo must be

performed in addition to the scheduled main-

tenance of the series-production truck.
The intervals are defined for standard use.

Shorter maintenance intervals can be defined

in consultation with the operating company,

depending on the application conditions of the

truck.
The following factors may necessitate shorter

maintenance intervals:

●

Dirty, poor-quality roadways

●

Dusty or salty air

●

High levels of air humidity

●

Extremely high or low ambient tempera-

tures, or extreme changes in temperature

●

Multi-shift operation with a high duty cycle

●

National regulations for the truck or for indi-

vidual components

Responsibility for maintenance

DANGER

Work performed by unauthorised persons on com-

ponents used for

Assistance

mode jeopardises

the safety functions of the truck.
To maintain components used for

Assistance

mode, contact the authorised service centre.

Maintenance work on components used for

Assistance

mode must only be performed

by the service centre authorised by the manu-

facturer.
The service engineer must have received spe-

cial training from the manufacturer regarding

the handling processes, technology and repair

work involved with the iGo neo. It is not

Maintenance

Maintaining the iGo neo

106

50108046112 EN - 07/2020 (03)

Содержание OPX 20













































































































































Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды

Still OPX 20, Дополнение к стандартной инструкции по эксплуатации

Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды