Still OPX 20 Скачать руководство пользователя страница 28

Страница: 28 / 140

Definition of terms used for responsible persons

Duties of the operating company

The operating company is the natural or legal

person or group who uses the truck or on

whose authority the truck is used.
The operating company must ensure that the

truck is only used for its intended purpose and

in compliance with the safety regulations in

these operating instructions and the operating

instructions for the series-production truck.
The operating company must ensure that all

users read and understand the safety informa-

tion in these operating instructions and in the

operating instructions for the series-production

truck. Both sets of operating instructions must

be accessible to the truck operator at all times.
The operating company is responsible for

scheduling and correctly performing regular

safety inspections, including safety inspec-

tions on the components used for

Assis-

tance

mode.

The requirements for the operating company

—as well as the rights, duties and rules of be-

haviour of the operating company—as descri-

bed in the operating instructions of the series-

production truck, also apply to trucks with the

additional

Assistance

mode of operation.

In addition, the following provisions apply:

●

As part of safety training, the operating

company must instruct the operator on how

to handle the truck in

Assistance

mode.

This information applies in particular for the

different methods of handling the truck in

the

Manual

and

Assistance

modes of

operation

●

The operating company must instruct all af-

fected personnel in the safe handling of a

truck in

Assistance

mode

●

The operating company is responsible for

ensuring the safe condition of roadways

and ground conditions (refer to the chapter

entitled "Roadways")

●

The operating company must ensure that

the truck is only operated by persons who

have been trained in the handling of

As-

sistance

mode

Safety

Definition of terms used for responsible persons

50108046112 EN - 07/2020 (03)

Содержание OPX 20













































































































































Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды

Still OPX 20, Дополнение к стандартной инструкции по эксплуатации

Результаты поиска

Содержание OPX 20

Отзывы:

Похожие инструкции для OPX 20

Бренды по названию

Популярные бренды