Still FM-X 10 N Скачать руководство пользователя страница 95

Страница: 95 / 380

Adjusting the horizontal suspension

(variant)

–

Push the lever (8) in sideways and slide the

driver's seat to the locked position. To re-

lease, push the lever outwards.

Using the lever (9), the driver can adjust the

hardness in several levels.

–

Move the lever (9) to the corresponding

notch.

Adjusting the steering column

DANGER

Risk of accident!

–

Ensure that the steering column is securely at-

tached.

Never adjust the steering column while driving.

–

Push the steering column adjustment lever

(1) forwards to release the steering column

lock. The lever can be moved back if it in-

terferes with the panelling in front during ad-

justment.

–

Move the steering column horizontally and

vertically into the desired position.

–

Tighten the locking lever (1). Make sure that

the steering column is locked securely.

1801_342-002



Operating

Checks and tasks before daily use

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Бренды по названию

Популярные бренды