Still FM-X 10 N, Оригинальное руководство пользователя

Страница: 234 / 380

The cold store equipment for industrial trucks
consists essentially of:
●
Oil types suitable for the cold store, for use
in the hydraulics and gearbox.
●
Lubricants suitable for the cold store, for
use on moving parts, such as gearing and
chains.
●
Chains treated with water-repellent low-
temperature grease are fitted.
●
The paintwork on the trucks is designed for
use at freezing temperatures.
●
Heating fans and heating resistors are posi-
tioned throughout the industrial truck in or-
der to keep the most important components
at operating temperature.
●
Precautions are taken to allow any conden-
sation water to drain off without it getting in-
to the electrics.
●
The lift cylinders and other hydraulic parts
are fitted with special seals where required.
Battery in the cold store
The drive batteries of the industrial trucks may
under no circumstances reach the tempera-
ture of the cold store (-30°C) or shock cold
store (-45°C). They must either be in operation
or charging. The batteries must not remain in
the cold store overnight without power drain or
charging. It is best to charge the battery out-
side the cold store and to continue to operate
the industrial truck in the cold store with re-
placement batteries. The battery charger must
always be operated outside the cold store.
CAUTION
Depending on the temperature, the charging time of
the battery may increase and the available capacity
of the battery may be reduced.
The lower the temperature at which the battery is
used, the longer the charging time and the lower the
available capacity. The standard capacity is reached
at 30°C. If the temperature is reduced by 1°C, this
capacity is reduced by approximately 1%.
Operating
4
Cold store application
222 50988078001 EN - 11/2021 - 10