Still FM-X 10 N Скачать руководство пользователя

Страница: 105 / 380

Lighting

STILL SafetyLight (variant)

WARNING

Danger of damage to eyes from looking

into the STILL SafetyLight.
Do not look into the STILL SafetyLight.

The STILL SafetyLight is a warning unit to en-

able early detection of trucks in driving areas

with low visibility (such as drive lanes, high

racks and at blind junctions).
The STILL SafetyLight is mounted on a sup-

port on the overhead guard such that it is not

affected by jolts and vibrations. It projects one

or more light blue light spots in front of or be-

hind the truck and thus warns others of the ap-

proaching truck. Several light spots are projec-

ted as a chase light. The chase light indicates

the location of the truck with its direction of

travel.
Depending on its configuration, the

STILL SafetyLight switches on automatically

when the truck is moving.



Operating

Lighting

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды