Still FM-X 10 N Скачать руководство пользователя

Страница: 62 / 380

WARNING

Brake fluid is hazardous to your health!
Brake fluid irritates the eyes and can dry

out the skin upon prolonged contact.

–

Coat your hands with a protective

skin cream prior to starting work.

–

Avoid prolonged or intensive skin

contact. In the event of skin contact,

clean the wetted skin with water and

soap, and subsequently apply a skin

care product.

–

Prevent contact with the eyes. In the

event of contact with the eyes, wash

out the affected eye(s) with clean wa-

ter for ten minutes and then ask a

doctor for advice.

–

Change clothing soiled with brake flu-

id as soon as possible.

CAUTION

Brake fluid is flammable!

–

Do not allow brake fluid to come into contact with

hot motor parts.

–

Smoking, fires and naked flames are prohibited.

CAUTION

Brake fluid has strong dissolving and colour-chang-

ing properties.

–

Immediately rinse off any brake fluid that has

splashed on paint, clothing, and shoes with plenty

of water

ENVIRONMENT NOTE

Brake fluid is a water pollutant!

●

Always store brake fluid in containers com-

plying with the regulations..

●

Do not spill brake fluid.

●

Spilt brake fluid must be removed immedi-

ately using an oil binding agent and dis-

posed of in accordance with regulations

●

Dispose of old brake fluid according to the

regulations.

●

Observe the national regulations for the

country in which the truck is being used.

Safety

Safety regulations for handling consumables

50988078001 EN - 11/2021 - 10

Содержание FM-X 10 N





























































































































































































































































































































































































Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды

Still FM-X 10 N, Оригинальное руководство пользователя

Результаты поиска

Содержание FM-X 10 N

Отзывы:

Похожие инструкции для FM-X 10 N

Бренды по названию

Популярные бренды