07 DESCRIPTION OF THE TRUCK
18
A. Weight adjustment
Fold out the crank on the weight adjustment control A and turn
it until the green marking points upwards while the driver is
sitting in the seat. The springing is then set to suit the weight of
the driver.
B. Locking the backrest tilt
The backrest may be set either to its moving tilt position or its
locked position. Lower lever B to its vertical position to lock the
backrest tilt. The backrest can be locked in any tilt position over
its whole travel.
C. Backrest tilt
When the backrest is in its tilt position (i.e. the lever is
horizontal), its tilt can be adjusted to one of three positions
using lever C. Tilt the backrest back, pull out the lever and place
it in the desired position. Release the backrest. For a more
upright position, move the lever so that it points downwards. So
that the backrest shall be angled more in the non-tilted state,
move the lever so that it is horizontal.
D. Forwards/backwards adjustment
The seat can be moved forwards or backwards by lifting the
handle beneath the seat upwards and at the same time moving
the seat.
G. Lumbar support
The lumbar support is adjusted by pumping up the bladder.
Release air by pressing the button on the bladder.
H. Seat heating (option)
Seat heating is switched on and regulated by rolling the wheel,
located to the left of the seat cushion, up or down.
Neck support (optional for)
Instruction Handbook UFW — D008453, B, GBR, ForTranslation