Still EXV 10 страница 96 Скачать руководство пользователя

Страница: 96 / 154

–

Slowly insert the forks at the centre of the

load to be lifted.

CAUTION

Insert the fork without bumping into either the shelv-

ing or the load.

–

Insert the forks as far as possible below the

load. If possible, the forks should be inser-

ted far enough in that the load is resting

against the fork carriage. The load centre of

gravity must be centred between the forks.

DANGER

Pay attention to the part of the forks protruding

from the load to be lifted.
Do not strike the wall, the shelving or other loads

and/or objects behind the load to be picked up.

–

Lift the load a few centimetres from the

ground and read the "Transporting loads"

section.

Load pick up from shelving.

–

Approach the shelving at moderate speed.

Use the drive control throttles to gradually

slow down and stop the truck perpendicular

to the shelving with the tiller in the braking

position.

–

Check that there is sufficient space be-

tween the forks and the shelving.



Use

Moving the load

45728043478 EN - 11/2021 - 09

Содержание EXV 10



























































































































































Результаты поиска

Содержание EXV 10

Отзывы:

Похожие инструкции для EXV 10

Бренды по названию

Популярные бренды

Still EXV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXV 10

Отзывы:

Похожие инструкции для EXV 10

Бренды по названию

Популярные бренды