Still EXV 10 Скачать руководство пользователя страница 40

Страница: 40 / 154

NOTE

The speed of the forks is proportional to how

hard the button (5) is pressed

Horn button (6)

●

Press the button (6) to operate the horn

This device allows the driver to signal his

presence when necessary

Anti-crush button (7)

●

Press the button (7) while the truck is travel-

ling towards the operator to automatically

reverse the direction of travel When revers-

ing, the truck travels at creep speed for a

few seconds

The button (7) is a safety device. Particularly

useful in narrow areas, it prevents the opera-

tor from being crushed between a wall and the

tiller head.
The direction of travel of the truck will be re-

versed if the button (7) comes into contact

with the body of the operator. When the oper-

ator moves away and releases the button (7),

the truck stops.
Creep Speed button (8) (optional)

●

The button (8) is fitted with the "tiller always

active" option (Creep Speed)

●

Keeping the button (8) pressed while turn-

ing the throttle (2 – 3) activates creep

speed, regardless of the tiller position

●

Keeping the button (8) pressed at the same

time as the fork lifting button (5) activates

fork lifting, regardless of the tiller position

NOTE

This function is ideal for manoeuvres in con-

fined spaces.

Initial lift (9 and 10) (optional)

The straddle lifting function increases the

ground clearance, meaning that the truck can

be used on uneven ground or slopes.

Overview

Instruments and controls

45728043478 EN - 11/2021 - 09

Содержание EXV 10



























































































































































Результаты поиска

Содержание EXV 10

Отзывы:

Бренды по названию

Популярные бренды

Still EXV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXV 10

Отзывы:

Бренды по названию

Популярные бренды