Still EXV 10 Скачать руководство пользователя страница 71

Страница: 71 / 154

●

Damaged or missing decals must be re-

placed in compliance with the marking posi-

tion table.

●

The roller guide rails must be coated in a

visible layer of grease.

●

Check that the wheels (traction, load) are in

good condition. The wheels must not show

any sign of damage or heavy wear. They

must be correctly attached.

●

Check that there are no objects, twine, etc.

blocking the operation of the wheels and

rollers (4).

●

Make sure the horn works correctly.

●

The battery cover (6) must be securely

closed.

●

Make sure the cover is (3) present and

properly secured.

●

Check that the chains (1) are undamaged

and evenly and adequately tensioned.

●

Visually check that the various parts of the

truck are in good condition and correctly

positioned;

●

Make sure that the anti-crush safety push-

button works correctly;

●

Check that the buttons and throttle/s on the

tiller are working correctly;

●

Make sure that the buttons and throttle au-

tomatically return to their correct position af-

ter release

●

Check that the battery plug/outlet are cor-

rectly positioned and intact;

●

Make sure that the start/stop key works cor-

rectly

●

Check that the truck brakes and stops when

the throttle is released;

●

Check that the truck brakes and stops when

the tiller is released;

●

Make sure that the electromagnetic brake

works effectively;

●

Check the automatic return of the tiller to

the vertical position with relative emergency

braking;

●

Check the battery electrolyte level and den-

sity as indicated in the battery instructions;

●

Check that the battery wiring is intact;

●

Check that the battery lock system is oper-

ating correctly (only for trucks designed for

side removal of the battery). Check that the

battery is locked in place.

●

Check the correct operation of the automat-

ic speed reduction system with forks raised

Use

Checks and operations prior to use

45728043478 EN - 11/2021 - 09

Содержание EXV 10



























































































































































Результаты поиска

Содержание EXV 10

Отзывы:

Бренды по названию

Популярные бренды

Still EXV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXV 10

Отзывы:

Бренды по названию

Популярные бренды