Still EXV 10 Скачать руководство пользователя страница 64

Страница: 64 / 154

Authorised and safe use

Intended use of the trucks

CAUTION

This machine is intended for the transport of loads

packed on pallets or in industrial containers designed

for this purpose, as well as for placing pallets into

and removing pallets from stock.
The dimensions and capacity of the pallets or con-

tainers must be adapted to the load being transpor-

ted to ensure stability.
The table of characteristics and performance attach-

ed to this user manual gives you some of the infor-

mation you need to check that the equipment is suit-

able for the work being carried out.
Any specific usage must be authorised by the site

manager; an analysis of the potential risks associ-

ated with this usage will enable him to put in place

any necessary additional safety measures.

Safety instructions relating to

use of the truck

Behaviour when driving

The operator must obey the same rules within

the plant as on the road. The operator must

drive at a speed appropriate for the driving

conditions. For example, the operator should

drive slowly around corners, when entering

and travelling through narrow passageways,

when driving through swing doors, at blind

spots, or on uneven surfaces. The operator

must always maintain a safe braking distance

from vehicles and persons in front of him and

must always have the truck under control. The

operator must avoid sudden stops, making

fast U-turns and overtaking other vehicles in

potentially dangerous areas or areas with poor

visibility.

WARNING

Driving the truck while sitting down is prohibited.

Use

Authorised and safe use

45728043478 EN - 11/2021 - 09

Содержание EXV 10



























































































































































Результаты поиска

Содержание EXV 10

Отзывы:

Бренды по названию

Популярные бренды

Still EXV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXV 10

Отзывы:

Бренды по названию

Популярные бренды