Still EXV 10 страница 80 Скачать руководство пользователя

Страница: 80 / 154

Maintain sufficient distance between the high-

est part of the forklift truck or load and sur-

rounding fixed installations. The height de-

pends on the lift height and the dimensions of

the load. Refer to the technical characteristics.

Rules regarding the traffic routes and

the manoeuvring areas

Only drive in approved areas. Traffic routes

must be free of obstacles. Loads may only be

unloaded and stored in places designed for

this purpose. The operator or his representa-

tive must ensure that no unauthorised person

accesses the working area.

Hazards

Hazards on traffic routes must be signalled by

means of road signs or possibly by additional

warning notices.

Starting the truck

Carry out all of the daily checks to be per-

formed by the operator.
Pull the emergency shutdown handle.
Put the tiller in the vertical position.
To start the truck, turn the ignition key. If the

truck has a numeric keypad rather than a key,

insert the appropriate PIN code.
Check the battery charge status on the indica-

tor and replace or charge the battery if neces-

sary.

Use

Driving

45728043478 EN - 11/2021 - 09

Содержание EXV 10



























































































































































Результаты поиска

Содержание EXV 10

Отзывы:

Похожие инструкции для EXV 10

Бренды по названию

Популярные бренды

Still EXV 10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXV 10

Отзывы:

Похожие инструкции для EXV 10

Бренды по названию

Популярные бренды