Still EXU-S 22 Скачать руководство пользователя страница 79

Страница: 79 / 122

Application

Digicode

456

PRG

1047_00

-007

Digicode control

Access to the electronic control is granted with

three different codes:
• Driver's code
• master code
• service code

Driver's code

The driver's code consists of four digits and

must be created by the Pool Manager.
It is used for the regular utilisation and opera-

tion of the truck by the driver and operator.
The knowledge of the code should be re-

garded as a key and must not be misused.

The driver's code must not be given to other

persons without express order.
The control can store a maximum of 200

driver's codes. A driver's code can be added

⇒ Chapter "Adding a driver's code", P. 4-75

or deleted ⇒ Chapter "Deleting a driver's

code", P. 4-77 with the master code.

Master code

The master code consists of four digits and is

reserved for the Pool Manager.
The factory setting of this code is "1234". The

pool manager is advised to replace this code

with a new master code ⇒ Chapter "Deleting

a master code", P. 4-73 or ⇒ Chapter "Adding

the master code", P. 4-72.
Like the driver's code, it is used for the regular

operation and use of the truck, but it also

allows the addition or deletion of a driver's

code. This control can store a maximum of

ﬁve master codes.

NOTE

If master codes or driver's codes are forgotten

or get lost, please contact the Service Engin-

eer, for he alone can make the stored codes

visible.

50018043464 EN - 10/2017

Содержание EXU-S 22



























































































































Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды

Still EXU-S 22, Оригинальное руководство пользователя

Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды