Still EXU-S 22 Скачать руководство пользователя страница 15

Страница: 15 / 122

Introduction

Technical service and spare parts

For scheduled maintenance and any repairs to

the forklift, contact only the authorised service

network.
The authorised service network has personnel

trained by the manufacturer, original spare

parts and the tools necessary to carry out

maintenance and repairs.
Servicing by the authorised service network

and the use of original spare parts maintain

the technical characteristics of the forklift over

time.
Only original spare parts provided by the man-

ufacturer may be used for forklift maintenance

and repairs. The use of non-original spare

parts invalidates the warranty and renders the

user responsible for any accidents due to the

inappropriateness of the non-original parts.

Type of use

"Normal use conditions" of the forklift are

understood as:
• lifting and/or transport of loads using forks

with weight and load centre within the

values provided (see Chapter 6 - Technical

Data).

• transport and/or lifting on smooth, ﬂat and

compact surfaces;

• transport and/or lifting of stable loads

uniformly distributed on the forks;

• transport and/or lifting with the load centre

approximately on the forklift's median

longitudinal plane.

DANGER

The forklift must not be used for other purposes.
Any other use renders the user solely responsible

for injury/damage to persons and/or objects and

voids the warranty.

The following scenarios are examples of

incorrect use of the forklift truck:
• Transport on uneven (irregular or non-

compact) surfaces

• loads that exceed the weight and/or load

centre limits;

• transporting non-stable loads;

• transporting loads not equally distributed on

the forks;

• transporting swinging loads;
• transporting loads whose load centre is

considerably displaced with respect to the

forklift's longitudinal median plane;

• transporting loads of dimensions such as to

block the view of the operator when driving;

• transporting loads piled so high that they

could fall onto the operator;

• travelling with a load over 300 mm off the

ground;

• transporting and/or lifting people;
• pushing or pulling loads;
• moving upwards or downwards on a slope

with the load facing downwards;

• turning at high speed;
• turning and/or moving sideways on slopes

(upwards or downwards);

• colliding with stationary and/or mobile

structures;

DANGER

Improper use of the forklift could cause it and/or at

the load to overturn.

Working conditions

The forklift has been designed and built for

internal transport.

50018043464 EN - 10/2017

Содержание EXU-S 22



























































































































Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды

Still EXU-S 22, Оригинальное руководство пользователя

Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды