Still EXU-S 22 Скачать руководство пользователя страница 92

Страница: 92 / 122

Application

Handling the battery

0148_003-02

– Disconnect the battery connector (3).

WARNING

Switch the truck and charger off before disconnec-

ting the male and female connectors.

– Connect the battery connector to the

charger connector.

NOTE

Observe the information in the operating

instructions for your battery and battery

charger (equalising charge).

WARNING

Risk of damage, shorting and explosion.
Do not place any metallic objects or tools on the

battery. No naked lights, no smoking permitted.

WARNING

The electrolyte (diluted sulphuric acid) is poisonous

and caustic!
Observe the safety precautions for handling battery

acid.

WARNING

Explosive gases are released during charging.
– Ensure that the room ventilation is adequate.

Changing the battery

There are two possibilities of replacing the

battery:
– Vertically with a lifting tackle (all trucks).
– from the side using a battery trolley (optional

- only for EXU 18 and 20 with side door).

In order to avoid short-circuits, it is recom-

mended that batteries with polar terminals or

unprotected connections be covered with a

rubber mat.

50018043464 EN - 10/2017

Содержание EXU-S 22



























































































































Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды

Still EXU-S 22, Оригинальное руководство пользователя

Результаты поиска

Содержание EXU-S 22

Отзывы:

Похожие инструкции для EXU-S 22

Бренды по названию

Популярные бренды