U-Line H-4124 Скачать руководство пользователя страница 1

Страница: 1 / 4

PAGE 1 OF 4

0414 IH-4124

H-4124

3-IN-1 HAND TRUCK WITH
SOLID RUBBER WHEELS

1-800-295-5510

uline.com

TOOls NEEDED

14mm Wrench

10mm Wrench

AssEMBlY

AttAcH HAndlE

1. Slide handle onto the top rails of frame. Align holes

in handle and frame. Insert (2) 10mm bolts through

frame and handle and secure with locknuts.

(See Figure 1)

AttAcH nOSE PlAtE, FOldInG nOSE

ExtEnSIOn And AxlE SuPPOrtS

1. Position frame reinforcements against bottom of

frame rail. Slide nose plate into channel on frame

reinforcements. Keep bolt holes aligned.

(See Figure 2)

2. Align axle supports with outside rail of frame. Make

sure supports are positioned as shown.

(See Figure 2)

NOTE: Align top two bolt holes on axle support.

3. Insert (4) 14mm bolts through the axle supports,

frame, frame reinforcements and nose plate.

Hammer

Pliers

Figure 1

Figure 2

WARNING! Do not use power tools.

Pour le français, consulter les pages 3-4.

Содержание H-4124

Страница 1: ...olding nose extension and axle supports 1 Position frame reinforcements against bottom of frame rail Slide nose plate into channel on frame reinforcements Keep bolt holes aligned See Figure 2 2 Align...

Страница 2: ...n holes in axle with grooves on back of the axle supports Use a hammer to tap in the round pins See Figure 4 2 Slide 3 washers onto end of the axle Slide a wheel onto each end of the axle Slide on ano...

Страница 3: ...repliable et des supports d essieu 1 Positionnez les renforts de cadre sur le bas des rails de cadre Glissez la bavette dans la rainure des renforts de cadre Gardez les trous de boulon align s Voir F...

Страница 4: ...AS Fixation de l essieu et des roues 1 Enfilez l essieu dans le trou des supports d essieu Alignez les trous dans l essieu avec les rainures l arri re des supports d essieu Utilisez un marteau pour pl...