Still EXH-S 20 Скачать руководство пользователя страница 98

Страница: 98 / 132

General maintenance information

General

The following instructions contain all the infor-

mation required for maintenance of your truck.

Carry out the various maintenance work in

compliance with the maintenance plan. This

will ensure that your truck is reliable and in

good working order and that the warranty re-

mains valid.

Maintenance plan

One of the display functions indicates the

truck's hours of use. Refer to it and consult the

truck's maintenance plan.
The maintenance plan is followed by advice to

facilitate work.
Maintenance intervals must be reduced if the

truck is used under harsh conditions (extreme

heat or cold, large quantities of dust).

Grade and quantity of lubricants and

other consumables

Only lubricants and other consumables speci-

fied in these operating instructions are author-

ised for use in maintenance work.
Lubricants and other consumables required

for truck maintenance are listed in the mainte-

nance specifications table.
Never mix different grades of grease or oil. If it

is absolutely necessary to change brands,

make sure to flush thoroughly beforehand.
Before changing any filters or working on the

hydraulic system, thoroughly clean the surface

and the areas around the part.
All containers used to pour oil must be clean.



Maintenance

General maintenance information

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 98 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: