Still EXH-S 20 Скачать руководство пользователя страница 89

Страница: 89 / 132

–

Lower and lock the handle (2) of the locking

bar (3) in the direction indicated by the ar-

row. The locking bar must be horizontal and

must be right up against the stop (5).

CAUTION

Risk of locking the battery incorrectly
The locking bar must not in any circumstances be

positioned under or on top of the stop. It must be

positioned against the stop.

–

Reconnect the battery connector.

–

Lower the latch of the battery compartment

door (if this option is selected). The door

that is not attached to the side of the battery

must be correctly locked.

–

Refit the battery hood.

–

Return the truck to service.

WARNING

Risk of injury
Before restarting the truck, ensure that the battery is

correctly installed. Check that the battery is locked

and that the battery hood is closed.

Changing the vertical access bat-

tery

To change the battery, proceed as follows:

–

Immobilise the truck.

–

Lower the load arms.

–

Switch off the ignition and remove the key.

–

Press the emergency off switch.

–

Open the battery hood.

–

Disconnect the battery connector.



Use

Handling the battery

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 89 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: