Still EXH-S 20 Скачать руководство пользователя страница 113

Страница: 113 / 132

Checking the battery acid level and

electrolyte density

WARNING

The electrolyte (diluted sulphuric acid) is poisonous

and caustic!

–

Always wear suitable protective equipment (indus-

trial goggles, safety gloves) when working on a

battery.

–

Never wear a watch or jewellery when handling

battery acid.

–

Do not allow any acid to get onto the clothing or

skin or into the eyes. If this does happen, rinse im-

mediately with plenty of clean water.

–

Immediately rinse away any spilled battery acid

with plenty of water.

–

In case of injury, seek medical advice immediate-

ly.

–

Always follow the safety information provided by

the battery manufacturer.

–

Comply with the regulations in force.

–

Check the battery acid level and electrolyte

density according to the battery manufactur-

er's recommendations.

–

The cell covers of the battery must be kept

dry and clean.

–

Any spillage of battery acid must be neutral-

ised immediately.

ENVIRONMENT NOTE

Dispose of any used battery acid in accord-

ance with the regulations.



Maintenance

Electrical equipment

103

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 113 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: