Still EXH-S 20 Скачать руководство пользователя страница 91

Страница: 91 / 132

Handling the truck in an emergency

Truck towing procedure

It is not possible to tow the truck with no elec-

trical function. The electromagnetic brake re-

mains in the closed position.
Truck towing is authorised with a rigid connec-

tion (tow bar) if the truck to be towed can no

longer be braked. Check that the towing vehi-

cle is sufficiently powerful to pull and brake the

truck being towed.

Moving with no battery

NOTE

In the event of an electrical fault or no battery,

it is possible to unlock the brake manually.

CAUTION

This procedure must be carried out by authorised

personnel.

–

Unload the fork arms, then disconnect the

battery.

–

Remove the engine cover.

–

Two M5 X 35 screws (1) are required.

–

Screw the screws (1) to the brake (2) in the

holes (3). The brake is then unlocked.

CAUTION

The truck must only be towed at low speeds.

0252_003-109



Use

Handling the truck in an emergency

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 91 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: