Still EXH-S 20 Скачать руководство пользователя страница 85

Страница: 85 / 132

Changing the side access battery

DANGER

Risk of trapping fingers
It is advisable to wear gloves when changing the bat-

tery.

WARNING

Risk of injury
Safety shoes must be worn when changing the bat-

tery.
Before handling, ensure that there is nobody around

the truck.

To remove the battery, we recommend that

you use a fixed roller frame or a truck with ex-

traction rollers (fitted with rollers) for easier

handling of the battery.
To change the battery, proceed as follows:

–

Immobilise the truck.

–

Lower the forks.

–

Switch off the ignition and remove the key.

–

Press in the emergency off switch.

–

Open the battery hood.

–

Disconnect the battery connector.

–

Place the connector on the battery cells.

–

Unlock the door that is not attached to the

side of the battery by lifting the latch (1).

Hold the door (2) to prevent it falling.



Use

Handling the battery

11538011751 EN - 02/2021 - 03

Содержание EXH-S 20





































































































































Результаты поиска

Содержание EXH-S 20

Отзывы:

Still EXH-S 20, Оригинальное руководство пользователя, Страница: 85 / 132

Результаты поиска

Содержание EXH-S 20

Отзывы: